Wood Stain Aerosol | Water Based Aerosol Stain | 400ml

• Water-based Stains: GRAIN GUARD Wood Stain Aerosols are a range of water-based stains, designed to leave attractive, natural look finish.
• Simple Application: Aerosol spray for easy application.
• Quick Dry: Fast dry formulation allows several coats to be applied quickly, speeding up the job.
• Suitable For All Woods: Can be used on all wooden substrates.
• Premium Finish: Range of attractive colours provide a long lasting, attractive finish that enhances woods natural beauty.
• Specially Formulated: Provides excellent grain definition on all wood, ideal for rejuvenating tables, chairs, sideboards, cupboards, etc.
• Colours Available: Light Oak, Medium Oak, English Oak, Dark Walnut, Black Ebony and Dark Red Mahogany.

1. What are GRAIN GUARD Wood Stain Aerosols?

These are water-based aerosol wood stains designed to rejuvenate, enhance, and protect wooden surfaces. They provide a natural, attractive finish, quick drying, and are suitable for both interior and exterior use.

2. What surfaces can I use them on?

Ideal for a wide variety of wooden substrates, including:

• Tables, chairs, and sideboards
• Cupboards and cabinets
• Interior and exterior wood surfaces
• Softwoods and hardwoods

3. What colours are available?

The aerosol range includes:

• Light Oak
• Medium Oak
• English Oak
• Black Ebony
• Dark Walnut

4. What are the key benefits of these aerosols?

• Easy Spray Application: Smooth, even coverage with minimal effort.
• Quick Drying: Touch-dry within 2 hours, enabling multiple coats in one session.
• Premium Finish: Enhances the natural grain and colour of wood for long-lasting beauty.
• Fade Resistant: Ideal for interior and exterior use.
• Versatile: Works on all wooden substrates.
• Made in Britain: High-quality, reliable formula.

5. How do I prepare the surface?

• Ensure the wood is clean, dry, and free from dust, grease, or old finishes.
• Avoid cleaning with white spirit.
• For best results, lightly sand the surface and always test on a small area first.
• Do not apply to wet wood.

6. How do I apply GRAIN GUARD Wood Stain Aerosols?

Step 1 – Shake:

Shake the can thoroughly before use to mix the water-based stain.

Step 2 – Apply:

Hold the aerosol 15–30 cm from the surface and apply in light, even coats along the wood grain. Wipe away any drips or excess with a clean, dry cloth.

Step 3 – Repeat if Needed:

• Light Oak & Medium Oak: 1 coat usually sufficient.
• Dark Walnut: 1–2 coats for optimum shade.
• English Oak & Black Ebony: 2–3 coats for best results.

Step 4 – Dry:

Allow at least 2 hours for the surface to dry before applying any topcoat or polish.

7. How much area does one 400ml aerosol cover?

Approximately 3 m² per coat, depending on wood type and absorbency.

8. How should I store the aerosol?

• Store in a cool, ventilated place, away from direct sunlight.
• To prevent nozzle blockages, invert the can and spray briefly for 2 seconds after use.

9. Is this safe for interior use?

Yes. The water-based formula is low-odour and suitable for interior and exterior applications, though always ensure adequate ventilation when spraying.

10. What makes these Wood Stain Aerosols different from other stains?

• Fast-drying and convenient aerosol format for easy application
• Provides excellent grain definition and natural wood enhancement
• Multiple coats possible for precise colour control
• Water-based, environmentally conscious, and fade-resistant

1. Preparation
Ensure the area is well ventilated and avoid breathing vapour / spray. Ensure the area to be treated is free from dirt, grease, debris and previous finishes. Do not apply to wood that is wet & avoid cleaning the surface with white spirit. For the best finish, a clean, well sanded surface will always yield the best results. ALWAYS first test on small area to assess compatibility and finish.

2. Application
Shake can well before use. Apply in light thin coats until desired colour is achieved. When applying use smooth stokes, 15-30cm away from surface. Drips or excess spray can be evened out using a clean dry cloth.

3. Repeat
Grain Guard’s Wood Stain typically needs just 1 coat to achieve the optimum shade on pine or light hardwoods. However, several coats can be applied in order to reach the desired colour.

- Light Oak & Medium Oak dye generally needs just 1 liberal coat to achieve the optimum shade on pine or light hardwoods.

- Dark Walnut dye generally needs 1-2 coats to achieve the optimum shade on pine or light hardwoods.

- English Oak & Black Ebony dye generally needs 2-3 coats to achieve the optimum shade on pine or light hardwoods.

4. Allow to dry
Allow the product to dry for at least 2 hours to fully dry before applying any topcoat / polishes.

5. Storage & Reuse
To prevent blockages, invert the can after use and spray for 2 seconds. This aerosol should be stored out of direct sunlight, in a cool well ventilated place.

Consult the safety data sheet for additional information.

Coverage: 400ml aerosol covers 3m² (1 coat)